Twinkle, Twinkle, Scrappy Star….

My, how colorful you are!

      Recently I was cutting some fabric leftovers and discovered I was winding up with a lot of 4.5″ and 2.5″ squares. a few months ago, I finished a quilt with Sawtooth Star blocks made with fabrics from each of the projects I’ve made over the past couple of years.

IMG_0809

“My Colorful Life” 2016 by Anne Wiens

      After I finish a project, I cut up any leftover strips of fabric less than a quarter-yard into Thrifty Quilter pieces for use later in scrap quilts. I decided to go ahead and make up an 8″ Sawtooth Star or two, and set them aside, adding to the stack until I had enough for a quilt. All the rest of the pieces went into my TQ bins. I was surprised at how quickly I collected the 35 blocks I needed for this 44″ x 60″ quilt!

     I like this little quilt. It’s really a material diary of my projects for 2015 and 2016!

     I decided to do another star quilt “diary” for this year’s projects, which will include class samples, demo samples, a challenge project, and charity quilts.

     Looking at my growing collection of 2.5″ squares and 4.5″ squares, I decided on a variation of the classic “Ohio Star” block. I’m thinking this quilt will become a class for the Tucker Trimmer® rotary cutting tool, because I’ll be making a lot of half-square triangles (HSTs) and quarter-square triangles (QSTs).

For each block you will need:IMG_1356

Two 4.5″ sq for background (White-not shown)

Two 4.5″ sq for star points (Dk Teal)

Three 4.5″ sq for star background (Lt Teal)

One  4.5″ sq for accent diamond (Lt Orange)

One 3.5″ sq for star center (Red)

Four 2.5″ sq for optional corner accent (Dk Orange)

Let’s begin construction by making the HST. For this, you need the two 4.5″ background (white) squares, and two of the 4.5″ star background (light teal) squares. Cut each square diagonally and sew into two HSTs.

IMG_1361

Step 1. Lay the Tucker Trimmer® on the HST, aligning the diagonal line with the seam line. Be sure the HST extends beyond the 3.5″ vertical and horizontal dashed lines on the tool.

IMG_1362

Step 2. Trim the right and top edges.

IMG_1363

Step 3. Rotate the HST, line the diagonal line up on the seam again. This time the cut edges snug right up to the 3.5″ vertical and horizontal dashed lines. Trim the right and top edges.

You now have four perfect 3.5″ HSTs. To be honest, you can do this with any small ruler that has a diagonal line in the corner.

IMG_1360The Tucker Trimmer® earns its keep when we make QSTs, and we’ll do that now. Cut the remaining 4.5″ star background (light teal) square, the 4.5″ accent diamond (light orange) square, and two star point (dark teal) squares diagonally twice, and sew into four QSTs as shown.

When you look at the tucker trimmer, you’ll notice that in addition to the solid diagonal line from corner to corner, there are dashed diagonal lines running in the opposite direction.

IMG_1365

When making QSTs, you line the solid diagonal line with one diagonal seam, and the appropriate (3.5″ in our case) dashed diagonal line with the other seam. Trim two sides, rotate and trim the other two sides, as you did before.

IMG_1367

Ohio Star – Variation 1

Lay out your center square, star point units and corner units as shown at right. This would be one variation of this block, and you may decide this is the look you want.

I’m going to set my blocks side-by-side, which will leave large white diamonds in the corners where the blocks come together. If I were going to send this quilt to a certain longarm artist I know, I’d leave that as a canvas for her to show off her mad skills. Instead, I’m going to add accent triangles to those white corners.

We’ll use the stitch-and-flip method for these accent triangles.

IMG_1368

Step 1. Draw a diagonal line on the back of the 2.5″ accent (dark orange) squares. Align the square with the white corner on the HST, and sew on the drawn line.

IMG_1370

Step 2. Trim 1/4″ outside the seam line.

IMG_1371

Step 3. Press the corner into place.

Now you can lay out the center square, corner units and star point units. Sew into rows and sew the rows together to complete your Ohio Star block.

IMG_1372

Ohio Star Variation 2 – 2016 by Anne Wiens

My plan is to make and collect these Ohio Star blocks until I have about twenty. I have a pretty interesting border treatment in mind that would be kind of traditional, but kind of modern. In my mind, it’s a great quilt. Time will tell if it translates to fabric!

 

Advertisements
Categories: 9" TQ Blocks, Quilts, Scrap Quilts, The Thrifty Quilter System, Thrifty Quilter Blocks & Patterns, Tucket Trimmer (Studio 180 Designs) | 4 Comments

Post navigation

4 thoughts on “Twinkle, Twinkle, Scrappy Star….

  1. Cheryl

    What a nice block. I think your idea is great to make a block or two from leftovers of each project. I might join you and try to do the same. Your star quilt turned out very nice.

    Liked by 1 person

  2. Marilyn

    Love this star I have the book and need to get started cutting my scraps

    Like

  3. Rochelle Summers

    I like this block but wonder what the finished size of the square is.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Create a free website or blog at WordPress.com.

%d bloggers like this: